PISTON RING
Green Energy — Green Power 2.0
Green Energy — Green Power 2.0

Green Power 2.0

Fuel saving 8–15% · Horsepower +10–20%

Want to save fuel and boost your vehicle's horsepower? Green Power combines a high-tech capacitor with a lithium-iron battery module to stabilize current output, giving your vehicle faster, smoother acceleration. Safety-certified for reliability. Get yours today and enjoy remarkable fuel savings and seamless acceleration!

C.T.I. GREEN POWER 2.0 fuses a super-capacitor with a lithium-iron battery module into one dual-core system — instantly stabilising your vehicle’s electrical network to unlock peak performance: markedly lower fuel use and a real gain in horsepower.

15%
Fuel saving 8–15%
20%
Horsepower +10–20%
2
Super-cap × Lithium-iron
12V
Petrol / diesel / hybrid
Section 01 · Dual core

Super-capacitor × Lithium-iron module

GREEN POWER 2.0 runs a market-leading twin-track architecture. The high-tech super-capacitor charges and discharges in an instant, absorbing and smoothing surges on the vehicle’s power network and turning the alternator’s AC sine-wave pulses into clean, steady DC voltage; the high-efficiency lithium-iron battery adds outstanding cycle life and stability, keeping the accelerator at top efficiency over the long term without the fade of conventional batteries.

Alternator AC pulsesSuper-cap + Li-iron moduleClean, stable DC output
Section 02 · How it works

Why it saves fuel and adds power

In plain terms: a car runs best on steady electrical power — but the power from the alternator actually surges up and down, so the spark plugs fire unevenly and some fuel is wasted, unburned. GREEN POWER 2.0 works like a voltage stabiliser for your car’s electricity, smoothing those ups and downs into steady, clean power. With steady power every spark is strong and the fuel burns more completely — so you use less of it and get more power.

How it works: unstable AC then super-capacitor and lithium-iron stabilise and filter, clean DC, stronger spark, fuel saving and more power
How it works (click to enlarge)
Section 03 · Advantages

Power awakened, intelligently protected

Fuel saving

Stabilises ignition voltage and synchronises the charging circuit with the ignition, so the engine reacts more crisply the instant it starts.

Longer battery life

Working in parallel with the battery, it lowers the load on the battery and extends its service life.

Stable voltage and current

Converts the alternator’s AC pulses into clean, steady DC for a finer, more consistent power supply.

More power and torque

Improves spark-plug ignition efficiency for steadier power delivery and noticeably stronger acceleration on hills.

Lower emissions

Better combustion efficiency helps reduce exhaust emissions, supporting energy saving and carbon reduction.

Instant cold-weather response

Starts react faster in low temperatures, keeping the driving experience consistent.

Section 04 · Specs & fit

Specifications

ItemOfficial data / spec
FitsAny petrol, diesel or hybrid vehicle with a 12V battery
Fuel saving8%–15% (varies with driving style and conditions)
Horsepower gain10%–20% (stronger torque and smoother acceleration)
Core technologyHigh-tech super-capacitor module + premium lithium-iron battery module
Extra functionPortable jump-start for OTHER vehicles (switch to the clip adapter)
InstallationWired in parallel with the vehicle battery — simple and safe

Certified to CE, FCC, UN38.3 and the 1.2 m drop test, and suitable for any petrol, diesel or hybrid vehicle with a 12V battery — installed in parallel with the vehicle battery, simply and safely.

Section 05 · Easy install

Easy install — 6 steps (normal mode)

1

Connect the positive lead

Attach the red positive lead to the device’s “+” terminal and tighten.

2

Connect the negative lead

Attach the black negative lead to the device’s “−” terminal and tighten.

3

Positive to battery +

Bolt the red lead’s ring terminal to the car battery’s positive post with a wrench.

4

Negative to battery −

Bolt the black lead’s ring terminal to the car battery’s negative post with a wrench.

5

Plug in the quick-connector

Mate the device’s quick-connector with the vehicle-side connector until secure.

6

Done

Check all leads and terminals are firmly connected — installation complete!

Section 06 · Emergency rescue

A portable power bank to rescue others

GREEN POWER 2.0 is not just an accelerator — it is your on-board portable power bank. When another vehicle has a flat battery and won’t start, just switch to the crocodile-clip adapter and use the GREEN POWER 2.0 in your car to jump-start the stalled vehicle — lending a hand without waiting for roadside assistance.

Portable power bank

It stores energy steadily day to day and, when needed, turns into an on-board backup power source.

Switch to rescue mode

Unplug the quick-connector and fit the crocodile-clip adapter to enter rescue mode.

Rescue other cars

Red clip to positive, black to negative on the stalled vehicle, and help it start.

Rescue mode — 4 steps

1

Unplug the battery connector

Disconnect the quick-connector plug currently attached at the battery.

2

Fit the clamp adapter

Swap the device’s quick-connector for the crocodile-clip adapter.

3

Connect to the stalled car

Clamp the red clip to the stalled vehicle’s battery positive, black to negative.

4

Ready to start

The device becomes a portable power bank — once connected you can jump-start the car.

Section 07 · Product video

See it in action

Section 08 · FAQ

Product Q&A

Does installation void the warranty or need rewiring?

No. GREEN POWER 2.0 connects in parallel to the vehicle’s 12V battery without changing any factory wiring — easy to fit and remove.

Which vehicles are compatible? Does it work on hybrids?

It suits any petrol, diesel or hybrid vehicle fitted with a 12V battery.

Does it really save fuel and add power? By how much?

In the manufacturer’s testing it saves around 8–15% fuel and adds around 10–20% horsepower; actual results vary with vehicle condition, driving style and road conditions.

How is it different from a normal jump starter?

Day to day it’s an accelerator that stabilises voltage, boosts power and saves fuel; when needed, switch to the clip adapter and it becomes a portable power bank to jump-start OTHER stalled vehicles — two uses in one.

Does it need maintenance or replacement?

With its super-capacitor and lithium-iron battery module it has a long cycle life and high stability, needing no special maintenance under normal use.

What safety certifications does it hold?

It is certified to CE, FCC, UN38.3 and the 1.2 m drop test (R.O.C. patent no. 32062359).

Back